Installation guide

Chapter 4. Qualiﬁcation Provisions Protogate Freeway Requirements Speciﬁcation (SRS)

Section Requirement

Name

Qualiﬁcation

Method

Notes

Section 3.8.33 GEN005200 -

X Displays

Exporting

Check Login to the Freeway, su - shell to become a root-level user,

then execute the command ps -ax |grep X, to verify that

Freeway does not run XWindow.

Section 3.8.34 GEN005300 -

Changed SNMP

Community

Strings

Check Login to the Freeway, su - shell to become a root-level user,

then execute the command find / -name snmpd.conf

-print ; more /usr/local/share/snmp/snmpd.conf and

look for the "rocommunity" line to verify that it is set to the

desired character string.

Section 3.8.35 GEN005500 -

SSH Version 1

Compatibility

Check Login to the Freeway, su - shell to become a root-level user,

then execute the command grep -i Protocol ‘find /

-name sshd_config‘ and verify that there is no uncommented

line enabling SSH version 1.

Section 3.8.36 GEN006380 -

NIS/NIS+

Implemented

Under UDP

Check Login to the Freeway, su - shell to become a root-level user,

then execute the command rpcinfo -p | grep yp | grep

udp and verify that it produces an error message, because neither

NIS/NIS+ nor rpcbind are running on the Freeway.

Section 3.11 Software

Quality

Test Setup Freeway with a full set of serial datalink ports, loaded with

sps_2432b.mem, and with loopback connectors between all port

pairs; run all possible spsalp loopback tests simultaneously at

9600bps on all the port pairs, for 7 days. While those tests are

running, make a separate login to the Freeway and run the top

utility to verify that "% idle" time is more than 0%.

30 Protogate DC-900-2021A