User`s guide

6: ICPLOAD Utility
DC 900-1516D 99
6.4.3.6 SET
This command sets the driver’s timeout value (in seconds) for the SingleStep debugger.
Format SET device_name /TIMEOUT=timeout_value
Parameters device_name
This parameter specifies the ICP device to set.
Qualifiers
/TIMEOUT
This qualifier specifies the timeout value in seconds.
Description The
SET command sets the driver’s timeout value for the
SingleStep debugger.
Example
ICPLOAD> SET ZJA0 /TIMEOUT=5
The example command above sets the timeout value at 5
seconds.
Foreign Command
$ LDICP device_name /TIMEOUT=5