User`s guide

98 DC 900-1516D
ICP2432 User’s Guide for OpenVMS Alpha (DLITE Interface)
6.4.3.5 GET
This command gets the driver’s timeout value (in seconds) for the SingleStep debugger.
Format GET device_name /TIMEOUT
Parameters device_name
This parameter specifies the ICP device to get.
Qualifiers
/TIMEOUT
This qualifier specifies the timeout value in seconds.
Description The
GET command shows the driver’s timeout value for the
SingleStep debugger.
Example
ICPLOAD> GET ZJA0 /TIMEOUT
3
The example command above shows the timeout value to be 3
seconds.
Foreign Command
$ LDICP device_name /TIMEOUT