User`s guide

30 DC 900-1516D

ICP2432 User’s Guide for OpenVMS Alpha (DLITE Interface)

SYSMAN-I-OUTPUT, command execution on node GABIN

SYSMAN-I-IOPREFIX, the current prefix list is: SYS$,DECW$

The current prefix list is SYS$,DECW$. The empty string equates to the prefix SYS$.

Next set the

ICP2432_ prefix:

SYSMAN> IO SET PREFIX="SYS$,DECW$,ICP2432_"

Step 6: Use autoconfigure to configure the ICP2432 cards in the system:

SYSMAN> IO AUTOCONFIGURE /SELECT=ZJ*

Step 7: Exit the SYSMAN utility:

SYSMAN> EXIT

Step 8: Check the ICP device status. Each ICP board will appear on the system as

devices ZJA0, ZJB0, etc. in the order that they were placed on the PCI bus. Use the fol-

lowing command to check that all installed ICP boards were configured and have

“online” status:

$ SHOW DEVICE ZJ

Step 9: If you prefer to use autoconfigure to automatically load ZJDRIVER as part of

the system startup (recommended), add the following line as the last line of the

SYS$MANAGER:SYCONFIG.COM file.