User`s guide

2: Software Installation
DC 900-1516D 29
2.5 Loading the ICP2432 Driver
The following procedure describes how to load the VMS device driver (ZJDRIVER) for
the ICP2432. Once the device driver is loaded on your system, it does not have to be
reloaded until the system is rebooted. The procedure also provides instruction on how
to configure your system so that the ZJDRIVER is loaded automatically during system
startup.
Step 1: Verify that you have installed one or more ICP2432 boards in your computer,
as described in the ICP2432 Hardware Installation Guide.
Step 2: Verify that you have installed the ZJDRIVER and DLITE software on your disk
drive.
Step 3: Set your default directory to the embedded “binary” subdirectory within the
Freeway directory tree as follows. DDCU: is the name of the disk device that contains
the Freeway tree:
$ SET DEF DDCU:[FREEWAY.CLIENT.VMS_EMB.BIN]
Step 4: Execute the configuration command file for the driver. This DCL command file
will link the ZJDRIVER and copy it to the proper system directory. This command file
also links the driver support programs and creates driver-related command files that are
customized for your system.
$ @ZJCONFIGURE
Step 5: Set the ICP2432_ prefix for the driver by using the SYSMAN utility. First display
the current prefix list:
$ MCR SYSMAN
SYSMAN>
IO SHOW PREFIX