User`s guide

20 DC 900-1516D
ICP2432 User’s Guide for OpenVMS Alpha (DLITE Interface)
2.1 Device Driver Installation Procedure
The ICP2432 driver (ZJDRIVER) uses the “Freeway” directory tree for building execut-
able images even if you are not using a Freeway server. The software installation proce-
dures described in this section load the ZJDRIVER and the DLITE API into a new or
already existing Freeway directory.
The following files are placed in the
FREEWAY directory:
• The [FREEWAY.CLIENT.VMS_EMB.BIN] directory contains the executable
images of the ZJDRIVER and driver utilities.
• The [FREEWAY.CLIENT.VMS_EMB.ICPLOAD] directory contains the source
code for the ICPLOAD protocol download utility.
• The [FREEWAY.CLIENT.VMS_EMB.DRIVER] directory contains the source code
for the ZJDRIVER and for the IOGEN Configuration Building Module (ICBM)
Utility.
• The [FREEWAY.CLIENT.VMS_EMB.LIB] directory contains the DLITE library
that is used when linking a VMS program that will communicate with the proto-
col software on the ICP.
Use the following procedure to install the ZJDRIVER, ICPLOAD, and DLITE software
files on your system.
Step 1: Determine the type of installation media you have. There are two types of
installation media: a VMS formatted tape that uses the
VMSINSTAL utility, or a VMS
BACKUP saveset taken from a CD or from the Protogate FTP site.
Step 2: To install the driver software from a VMS formatted media using the
VMSINSTAL utility, refer to Section 2.3 on page 23. To install the driver software from
a VMS
BACKUP saveset, refer Section 2.4 on page 27.