User`s guide

54 DC 900-1317J
ADCCP NRM Programmer’s Guide
Table 3–6: ICP Packet dlRead usProtCommand and iProtModifier Fields
dlRead usProtCommand Field dlRead iProtModifier Field Reference Section
DLI_PROT_RECV_STATION_INIT
0 = remote (SIM/RIM on line)
1 = local (no SIM/RIM)
Section 3.4.2 on page 56
DLI_PROT_RECV_UNFORMATTED_DATA
Bit 0–6: Reserved
Bit 7: Error indication
Section 3.4.4 on page 58
DLI_PROT_RECV_EXCHANGE_ID
Section 3.4.7 on page 59
DLI_PROT_RECV_DATA
Bit 0: Reserved
Bits 1 and 2: NRM Secondary only
0 = Normal Addressing
1 = Selective Broadcast
2 = General Broadcast
Bits 3–7: Reserved
Section 3.4.9 on page 61
DLI_PROT_RECV_UNNUMBERED_DATA
Bit 0: Reserved
Bits 1 and 2: NRM Secondary only
0 = Normal Addressing
1 = Selective Broadcast
2 = General Broadcast
Bits 3–6: Reserved
Bit 7: Error indication
Section 3.4.11 on page 63
DLI_PROT_RESP_LOCAL_ACK
Type of packet being ACKed Section 3.4.14 on page 65
DLI_PROT_RESP_NORMAL_ACK
Number of packets ACKed Section 3.4.15 on page 66
DLI_PROT_RESP_BIND_ACK
Station mode
1 = NRM 4 = NRME
Section 3.4.17 on page 67
DLI_PROT_RESP_UNBIND_ACK
Section 3.4.19 on page 69
DLI_PROT_RECV_STATION_RESET
Station mode
1 = NRM 4 = NRME
Section 3.4.21 on page 77
DLI_PROT_RECV_STATION_RESET_CFM
Station mode
1 = NRM 4 = NRME
Section 3.4.23 on page 78
DLI_PROT_RECV_LINK_EXCEPTION
1 = Data Poll Timeout
2 = Data Poll Resumed
3 = Retry Limit Exceeded
4 = Flags Synch. Lost
7 = DCD Lost
8 = DCD Gained
Section 3.4.25 on page 78
DLI_PROT_RECV_STATISTICS_REPORT
Section 3.4.27 on page 79
DLI_PROT_RESP_ERROR
Rejected command type Section 3.4.28 on page 80
DLI_PROT_RESP_BUF_REPORT
0 Section 3.4.30 on page 81
DLI_PROT_RECV_BUF_SIZE
Section 3.4.32 on page 82
DLI_PROT_RECV_SOFTWARE_VER
Section 3.4.34 on page 82