User`s guide

3: ADCCP NRM DLI Functions
DC 900-1317J 53
Table 3–5: Client Packet dlWrite usProtCommand and iProtModifier Fields
dlWrite usProtCommand Field dlWrite iProtModifier Field Reference Section
DLI_PROT_SEND_STATION_INIT
0 = remote (SIM/RIM on line)
1 = local (no SIM/RIM)
Section 3.4.1 on page 55
DLI_PROT_SEND_UNFORMATTED_DATA
Section 3.4.3 on page 57
DLI_PROT_SEND_UNFORMATTED_DATA_EOM
Section 3.4.5 on page 58
DLI_PROT_SEND_EXCHANGE_ID
Section 3.4.6 on page 58
DLI_PROT_SEND_NORM_DATA
Bit 0
0 = Final Frame
1 = More Data Follows
Bits 1 and 2: NRM Primary only
0 = Normal Addressing
1 = Selective Broadcast
2 = General Broadcast
Bits 3–7: Reserved
Section 3.4.8 on page 59
DLI_PROT_SEND_UNNUMBERED_DATA
Bit 0
0 = Final Frame
1 = More Data Follows
Bits 1 and 2: NRM Primary only
0 = Normal Addressing
1 = Selective Broadcast
2 = General Broadcast
Bits 3–7: Reserved
Section 3.4.10 on page 62
DLI_PROT_SEND_UNNUMBERED_DATA_EOM
Section 3.4.12 on page 64
DLI_PROT_SEND_SET_MULTIPNT_LIST
Section 3.4.13 on page 64
DLI_PROT_SEND_BIND
Time limit
0 = No Limit
1–255 = Limit in seconds
Section 3.4.16 on page 67
DLI_PROT_SEND_UNBIND
Section 3.4.18 on page 68
DLI_PROT_CFG_LINK
–1 = Adjust station timers
0 = Reconfigure Link
1 = Configure NRM/NRME station
Section 3.4.20 on page 69
DLI_PROT_SEND_STATION_RESET
Section 3.4.22 on page 77
DLI_PROT_SEND_STATION_RESET_CFM
Section 3.4.24 on page 78
DLI_PROT_GET_STATISTICS_REPORT
Section 3.4.26 on page 79
DLI_PROT_GET_BUF_REPORT
Section 3.4.29 on page 81
DLI_PROT_SET_BUF_SIZE
Number of 64-byte pages Section 3.4.31 on page 81
DLI_PROT_GET_SOFTWARE_VER
Section 3.4.33 on page 82