User`s guide

D: ADCCP NRM Detailed Command and Response Headers
DC 900-1317J 149
D.17 recv-exchange-id-packet (optional)
Packet Description
This packet is valid only if option 1 (station_config_packet) for the specified station and
the station is not in initialization state. This packet may be received as a response to a
send-exchange-id-packet or as an unsolicited ICP packet. If it is in response the fills in
the remote station’s identification. If it is a reply the client fills in the
usProtXparms[0]
field with its local station’s identification.
Packet Header
Freeway (DLI api only):
usFWPacketType = FW_DATA
usFWCommand = FW_ICP_READ
usFWStatus = 0
ICP:
usICPClientID = 0
usICPServerID = 0
[usLength = 16 (used for non DLI api only)]
usICPCommand = DLI_ICP_CMD_READ
iICPStatus = - 0 or DLI return status
usICPParams[0] = 0
usICPParams[1] = 0
usICPParams[2] = 0
Protocol:
usProtCommand = DLI_PROT_RECV_EXCHANGE_ID
iProtModifier = 0
usProtLinkID = port number
usProtCircuitID = 0
usProtSessionID = protocol session number from "attach-packet"
usProtSequence = 0
usProtXparms[0] = -Remote or local station identification
usProtXparms[1] = 0
Note
The Freeway header is used only with DLI (it is not applicable for
DLITE), and the
usLength field of the ICP header is used only with-
out DLI.
Data
(Optional)