User`s guide

140 DC 900-1317J
ADCCP NRM Programmer’s Guide
D.10 start-link-ack-packet
Packet Description
This packet is used to receive a start link ack packet.
Packet Header
Freeway (DLI api only):
usFWPacketType = FW_DATA
usFWCommand = FW_ICP_READ
usFWStatus = 0
ICP:
usICPClientID = 0
usICPServerID = 0
[usLength = 16 (used for non DLI api only)]
usICPCommand = DLI_ICP_CMD_READ
iICPStatus = 0 - for Big Endian Clients or
= 0x4000 - for Little Endian Clients
usICPParams[0] = 0
usICPParams[1] = 0
usICPParams[2] = 0
Protocol:
usProtCommand = DLI_PROT_RESP_BIND_ACK
iProtModifier = 0
usProtLinkID = port number
usProtCircuitID = 0
usProtSessionID = protocol session number from "attach-packet"
usProtSequence = 0
usProtXparms[0] = 0
usProtXparms[1] = 0
Note
The Freeway header is used only with DLI (it is not applicable for
DLITE), and the
usLength field of the ICP header is used only with-
out DLI.
Data
None