User`s guide

120 DC 900-1317J
ADCCP NRM Programmer’s Guide
Tabl e B– 1: ADCCP NRM Error Codes
Code Mnemonic Meaning
0
DLI_ICP_ERR_NO_ERR
A data block has been successfully transmitted or received
on the line or a command has been successfully executed.
–101
DLI_ICP_ERR_BAD_NODE
DLI internal error. A bad node number was passed by the
DLI.
–102
DLI_ICP_ERR_BAD_LINK
An illegal link number was passed to DLI.
–103
DLI_ICP_ERR_NO_CLIENT
ADCCP NRM has the maximum number of clients regis-
tered for that link.
–105
DLI_ICP_ERR_BAD_CMD
The command from the client program is not a legal
value.
–109
DLI_ICP_ERR_XMIT_TIMEOUT
Transmission attempt failed to complete within a time
interval appropriate to the data rate and transmission
length. This can occur when external clocking is config-
ured but no transmit clock is provided, or when the clear-
to-send modem control signal is absent or lost during a
transmission attempt.
–119
DLI_ICP_ERR_BAD_SESSID
If this error occurs, please call Protogate.
–121
DLI_ICP_ERR_NO_SESSION
No more clients are available on this ICP. This error
should never occur; if it does, please call Protogate.
–126
DLI_ICP_ERR_XMIT_ABORTED
Transmission request aborted or not attempted. A device
(link or station) that was online at the time the command
was issued has experienced a failure, or has been affected
by a
DLI_ICP_CMD_UNBIND command packet from the cli-
ent application.