User`s guide

106 DC 900-1317J
ADCCP NRM Programmer’s Guide
Table 5–1: ADCCP NRM ICP Link Configuration Parameters for Using dlicfg
dlicfg Option Name Default Valid Range
circuitID 0 1–65535
msgBufSize 512
a
128–8128 bytes
dataRate 2400 1200, 2400, 4800, 9600, 19200, 38400, 56000,
57600, 64000, 73728, 76800,
92160, 115200 or 122880 bits/sec
clockSource “external” “external” or “internal”
encoding “nrzi” “nrz”, “nrzi” or “anrzi”
elecinterface “eia232” “eia232”, “eia530”, “v35”, or “unbeia449”
enableXIDRD “no” BOOLEAN
enableREJ “no” BOOLEAN
enableSREJ “no” BOOLEAN
enableUI “no” BOOLEAN
enableSIMRIM “no” BOOLEAN
enableUP “no” BOOLEAN
enableExtendedAddress “no” BOOLEAN
forbidResponseIframes “no” BOOLEAN
forbidCommandIframes “no” BOOLEAN
enableExtendedSequencing “no” BOOLEAN
window 1 1 (if asyncIO = “no” and localAck = “yes”)
1–7 (if enableExtendedSequencing=”no”)
1–127 (if enableExtendedSequencing=”yes”)
srejThreshold 1 0–size of “window”
maxData 0 0–8128
localAddrSize 0 0–1 (if enableExtendedAddress=”no”)
0–4 (if enableExtendedAddress=”yes”)
remoteAddrSize 0 0–1 (if enableExtendedAddress=”no”)
0–4 (if enableExtendedAddress=”yes”)
a
The msgBufSize parameter allows the DLI to configure the ICP message buffer size (equivalent to the
DLI_PROT_SET_BUF_SIZE command in Section 3.4.31 on page 81).