User guide

80 DC 900-1333Q
Freeway User Guide
4.4 Shutdown Options
To access the Shutdown Options menu as shown in Figure 4–2, enter ‘1’ at the Freeway
Interactive Menu.
4.4.1 Reboot Server
To reboot the Freeway server, enter ‘2’ at the Shutdown Options menu. All currently
running tasks are terminated immediately.
Note
After power up or during reboot, Freeway first executes system
diagnostics. If the diagnostics are successful, the boot process is
performed automatically.
During the boot process, the Freeway server loads the operational software from its own
flash or hard drive. If the Freeway is configured to load from a boot server across an
Ethernet network, it uses TCP/IP and related facilities including the file transfer proto-
col (FTP) or remote shell (RSH) to get the operational software. During the boot pro-
cess, status information is available at the local console display, if one is currently
installed. If you have used rlogin or telnet to log in to Freeway from another computer
Figure 4–2: Shutdown Options Menu
Shutdown Options
----------------
1) Return to Interactive Menu
2) Reboot Server
Select: