User guide

56 DC 900-1333Q
Freeway User Guide
Note
Do not use VMSINSTAL to open the backup saveset file included
in the Freeway distribution CDROM.
Use the following command if you want the Freeway directory tree installed as a root
directory on your disk:
$ backup/new serfwo025.bck/save [000000...]
Use the following command if you want to install the Freeway directory tree as a subdi-
rectory of an already existing directory (in this example
[user.protogate]):
$ backup/new serfwo025.bck/save [user.protogate...]
Step 6: Dismount the CDROM. Below is an example of the dismount command (the
device name on your system might be different):
$ dismount dka400:
3.4.4 Installing Freeway Software on a Windows system
The Freeway server/client distribution media is a CDROM labeled Freeway Server Soft-
ware. Included on the CDROM is a compressed zip file for installing the server/client
software on Windows systems. Depending on how your Windows system is configured,
use one of the following procedures to install the Freeway software from the distribu-
tion media onto your Windows computer.
Step 1: Insert the CDROM into the drive. If your Windows computer is set up to
auto-run CDROMs and you have a browser enabled, the installation page will come up
automatically. If your computer has auto-run disabled, click on the
index.html file on the
CDROM to open the installation page.