User guide

3: Client Software Installation
DC 900-1333Q 55
installing the server/client software on VMS systems. Use the following procedure to
install the DLI/TSI software from the distribution media onto your VMS computer.
Note
If you can not find the VMS saveset file on your distribution
CDROM, please contact Protogate for assistance.
Step 1: On the client system (previously configured as described in Section 3.3), log
in to an account with SYSTEM privileges.
Step 2: Change directory to a local working directory on same disk where the Free-
way software will be installed, for example:
SYS$SYSDEVICE:[user.protogate].
Step 3: Insert the Freeway Server Software distribution CDROM into the appropriate
drive and mount the CDROM. Below is an example of the
mount command (the device
name on your system might be different):
$ mount dka400:
Step 4: The Freeway Software saveset file (serfwo025.bck) is located in the directory
[parts.PF-200.PF-200-0080] on the CDROM. Copy this file to your local directory then use
the
set file command to reformat the file. Below is an example of the commands to copy
and reformat the saveset file in the local directory:
$ copy dka400:[parts.pf-200.pf-200-0080]*.* [user.protogate]
$ set file /attr=(RFM:FIX,RAT:NONE,LRL:32256) serfwo025.bck
Step 5: Use the backup command to retrieve the files from the saveset file. Use one of
the two below examples of the
backup command.