User guide

3: Client Software Installation
DC 900-1333Q 53
The Freeway server and DLI/TSI documentation consist User Guides and Reference
Manuals in PDF format. These documents are also available on Protogate’s web site
(www.protogate.com).
Caution
Remember that installing new software overwrites the previous
software.
Note
It is recommended that you use the default directory structure. If you
install the software in a non-default directory, you must later mod-
ify certain files if you plan to use this client as a boot server.
3.4.2 Installing Freeway Software on a UNIX system
The Freeway server/client distribution media is a CDROM labeled Freeway Server Soft-
ware. Included on the CDROM is a file in tar format for installing the server/client soft-
ware on UNIX systems. Use the following procedure to install the DLI/TSI software
from the distribution media onto your UNIX computer.
Step 1: On the client system (previously configured as described in Section 3.3), log
in to a root or other privileged account.
Step 2: Change to the default directory called
/usr/local. The installation procedure is
designed to use this default directory and the directory structure under it.
Step 3: Insert the Freeway Server Software distribution CDROM into the appropriate
drive and mount the CDROM. Below is an example of the
mount command (the device
name on your system might be different):
mount /dev/cdrom