User guide

38 DC 900-1333Q
Freeway User Guide
After changing all the desired parameters, you must type “yes” at the “save modifica-
tions” prompt in order for the changes to take place.
For more detailed information about the boot parameters, refer to Table 4– 2 on
page 107.
Note
The Freeway boot parameters can also be modified by using a boot
parameters initialization disk. For more information on this
method, see Section 5.1.4 on page 144.
Figure 2–3: Example of Modifying Freeway Boot Parameters
Select: 3
Freeway System Boot Parameters
------------------------------
Enter '.' to erase parameter
Enter '<RETURN>' for no parameter change
Boot Device : ide=0,0
Processor Number : 0
FTP User Name : freeway
FTP Password : password
Flags : 0x1000
Freeway Server Name : freeway_0 devel_fwy
Freeway Inet Address : 192.168.1.29 192.168.0.100
Freeway Subnet Mask : ffffff00
Boot Server Name : gw2
Boot Server Inet Address: 192.168.1.2
System Boot Directory : /usr/home/freeway/boot/
System Boot File Name : fwybsd
Configuration File Name : bootcfg
Secondary Net Interface : fei
Gateway Inet Address :
Save modifications?
Enter 'yes <RETURN>' to save modifications
Enter 'no <RETURN>' to prevent modifications: yes
copying new boot parameters to BSD partition on hard disk