Manualshelf

User guide

ManualsBrandsProtogate ManualsComputer equipmentFreeway 3112
31323334353637383940
2: Freeway Installation and Initial Boot
DC 900-1333Q 35
ports on the Freeway are normally disabled after boot-up. The Freeway Console does
not require a mouse device.
Caution
Never connect or disconnect the PS2 keyboard while the Freeway
server is powered on.
2.2.3 Power up the Freeway
In order to power up the Freeway server, the power switches on the power supply (or
both power supplies for redundant power systems) must be turned on. Then turn on
the main power switch at the front of the unit. You should start seeing messages dis-
played on the console device after about 5 to 10 seconds. Figure 2–1 shows an example
of what you will see on the console display when the Freeway is powered up.
Figure 2–1: Sample Initial Freeway Boot Display