User guide

B: Useful Shell Commands
DC 900-1333Q 215
Exit the shell and return to the Freeway Main Menu:
exit
B.5 Remote Login Commands
The most current Freeway servers do not allow remote logins as root or shell over unse-
cure applications such as rlogin or telnet. If you need to login to a Freeway as root/shell
from a client that only has one of these applications, you can login as “freeway” and
then “set user” to shell as shown in the following steps:
Step 1: Log into the Freeway from the remote console.
Freeway User Login: freeway
Password: password
Step 2: At the main menu select Run FreeBSD Shell (6). You will see a dollar sign ($)
prompt.
Step 3: Enter the following command to "set user" to the root/shell user and enter the
password when prompted (the default password for the "shell" user is "setup").
su - shell
When you have successfully changed to the shell user, you will see a pound sign (#)
prompt.