User guide

8: Configuring a Boot Server

DC 900-1333Q 203

8.5 Modify the Freeway System Boot Parameters

In the Freeway System Boot Parameters menu, modify the path name for the System Boot

Directory

. See Section 4.6.1 on page 105 for details on how to modify the boot parame-

ters. Modify the boot parameters as follows:

1. Change the Boot Device to

fei.

2. Change the FTP User Name to the name of the FTP account you set up on the

boot server for use by the Freeway.

3. Change the FTP Password to the password of the above FTP account.

4. Change the Boot Server Name to the name of your boot server

5. Change the Boot Server Inet Address to the IP address of your boot server (in dot

format)

#----------------------------------#

# ICP0 Physical Parameters #

#----------------------------------#

device_name = icp0

device_type = icp2432

slave_address = 0x14

bus_number = 0

download_script = awsloadb

#----------------------------------#

# ICP1 Physical Parameters #

#----------------------------------#

#device_name = icp1

#device_type = icp2432

#slave_address = 0x13

#bus_number = 0

#download_script = mstloadb