User guide

6: Customizing the System Configuration
DC 900-1333Q 179
6.5 Customizing the Server TSI Configuration File
Use the following procedure to customize the server TSI configuration file (muxcfg):
Step 1: You can use any ASCII text editor to edit the
muxcfg file. If a default parameter
value is desired, you can omit the parameter line from the file. Parameters in the “main”
section apply to non-connection-specific operations. Parameters in the “connection-
dependent” section apply to a single connection only.
Step 2: If you change the name of the
muxcfg file, you must modify the tsi_config_file
parameter in the boot configuration file. See Section 6.3 on page 167 for a description
of the default boot configuration file.
Step 3: Reboot Freeway. You can use the Freeway Boot System Main Menu from the
local console or the Freeway Interactive Menu from the local console or any computer
on the network.