User guide

174 DC 900-1333Q
Freeway User Guide
to be used to specify each, are as defined for the Boot Device parameter in
Table 4–2 on page 107.
The
added_interface_type parameter may be repeated along with the
added_interface_mask and added_interface_addr parameters to indicate multiple added
interfaces.
Added Interface Mask For each
added_interface_type parameter, the optional
added_interface_mask parameter may be used to specify the subnet mask to be set for
the interface. The parameter must be provided in hexadecimal format. If this
parameter is omitted for an added interface, the subnet mask specified in the Sub-
net Mask parameter of the System Boot Parameters menu (Table 4 –2 on
page 107) is used for that interface.
Added Interface Address The
added_interface_addr parameter must be supplied with
each
added_interface_type to indicate the Internet address in decimal format to be
assigned to the added interface.
6.4 Server TSI Configuration File (muxcfg)
Client application and loopback test programs use a client TSI configuration file in
order to access the Freeway server. There is also a server TSI configuration file
(/
tmp/boot/muxcfg) for the server TSI software running on Freeway. This section gives an
overview of TSI configuration and describes the
muxcfg file. See the Freeway Transport
Subsystem Interface Reference Guide for complete details regarding TSI configuration.
6.4.1 TSI Configuration Overview
The information exchange between the server software and the TSI is managed by a TSI
connection. The TSI connection manages the I/O with the client using the server’s socket
library and other I/O support functions such as the UNIX signal facility. One TSI con-
nection can be used by multiple server sessions.