User guide

158 DC 900-1333Q
Freeway User Guide
• Virtual devices within the Freeway server, such as the ICP_IPs. Freeway uses this
information to define the characteristics of IP data streams.
• Services or protocols that run on the physical or virtual devices. Freeway uses this
information to download the appropriate software to these devices during the
boot process.
• Server-wide parameters to be used by the Freeway system service provider to con-
figure Freeway at startup.
The server TSI configuration file (
/tmp/boot/muxcfg) defines the parameters that allow the
server TSI software to communicate with the client TSI software. It is explained further
in Section 6.4 and Section 6.5.
The SRA startup file (
/tmp/boot/rc.startsra) does not even exist on most standard Freeway
systems, however, you can create this file in order to execute additional shell script com-
mands during the Freeway boot process. Despite the file name, you don’t need to run a
Server Resident Application (SRA) in order to use the
rc.startsra file.