User guide

DC 900-1333Q 157
Chapter
6
Customizing the System
Configuration
This chapter describes how to customize the Freeway system configuration by modify-
ing and/or adding system configuration files.
Note
Additional information on customizing the Freeway system can be
found on the Protogate web site at www.protogate.com/faq.html.
The majority of the Freeway system configuration information is contained in three
configuration files:
• bootcfg
• muxcfg
• rc.startsra
All three of these files are located in the /tmp/boot directory on the Freeway system.
Default versions of these files are shipped with your Freeway software and are sufficient
for most sites. If you need to customize the system information in these files, follow the
procedures described in this chapter.
The boot configuration file (
/tmp/boot/bootcfg) is explained further in Section 6.3. It
defines the following:
• Physical devices within the Freeway server, such as the ICPs. Freeway uses this
information to configure devices during the boot process.