User guide
5: Freeway Boot and Operation
DC 900-1333Q 149
5.2.3 SNMP
SNMP access is available on the Freeway, and is enabled by default. There are also a full
set of client SNMP tools, such as snmpwalk. The MIBs which are specific to the Freeway
are described in the
freeway/include/ directory on your Freeway software CDROM, in the
files
SIMPACTFREEWAY-MIB.txt and RS-232-MIB.txt . Those files are also installed in the Free-
way disk drive in the directory
/usr/local/share/snmp/mibs/ . For more information about
SNMP, login to your Freeway, select "6" at the Main Menu to enter the BSD shell, and
type these commands:
man snmpd
man snmp.conf
man snmpd.conf
snmpwalk -v 2c -c public localhost freeway
snmpwalk -v 2c -c public localhost icpName
snmpwalk -v 2c -c public localhost icpType
snmpwalk -v 2c -c public localhost icpProtocol
snmpwalk -v 2c -c public localhost icpProtocolRelease
snmpwalk -v 2c -c public localhost icpOSRelease
snmpwalk -v 2c -c public localhost icpPhysicalStatus
snmpwalk -v 2c -c public localhost icpServiceStatus
snmpwalk -v 2c -c public localhost icpNumberPorts
snmpwalk -v 2c -c public localhost icpSlaveAddress
snmpwalk -v 2c -c public localhost icpDownloadScript
snmpwalk -v 2c -c public localhost rs232PortType
snmpwalk -v 2c -c public localhost rs232PortInSigNumber
snmpwalk -v 2c -c public localhost rs232PortOutSigNumber
snmpwalk -v 2c -c public localhost rs232PortInSpeed
snmpwalk -v 2c -c public localhost rs232PortOutSpeed
snmpwalk -v 2c -c public localhost rs232PortInFlowType
snmpwalk -v 2c -c public localhost rs232PortOutFlowType
snmpwalk -v 2c -c public localhost rs232AsyncPortBits
snmpwalk -v 2c -c public localhost rs232AsyncPortStopBits
snmpwalk -v 2c -c public localhost rs232AsyncPortParity
snmpwalk -v 2c -c public localhost rs232AsyncPortAutobaud
snmpwalk -v 2c -c public localhost rs232AsyncPortParityErrs
snmpwalk -v 2c -c public localhost rs232AsyncPortFramingErrs
snmpwalk -v 2c -c public localhost rs232AsyncPortOverrunErrs
snmpwalk -v 2c -c public localhost rs232SyncPortClockSource
snmpwalk -v 2c -c public localhost rs232SyncPortFrameCheckErrs
snmpwalk -v 2c -c public localhost rs232SyncPortTransmitUnderrunErrs
snmpwalk -v 2c -c public localhost rs232SyncPortReceiveOverrunErrs
snmpwalk -v 2c -c public localhost rs232SyncPortInterruptedFrames
snmpwalk -v 2c -c public localhost rs232SyncPortAbortedFrames
snmpwalk -v 2c -c public localhost rs232SyncPortRole
snmpwalk -v 2c -c public localhost rs232SyncPortEncoding
snmpwalk -v 2c -c public localhost rs232SyncPortRTSControl
snmpwalk -v 2c -c public localhost rs232SyncPortRTSCTSDelay