User guide

130 DC 900-1333Q
Freeway User Guide
4.8.3.2 Display Floppy Disk File
To display a floppy disk file as shown in Figure 4–46, enter ‘3’ at the Floppy Disk Copy
Options menu. If you change your mind about displaying a file, simply press <return>,
then you will be prompted to press <return> again.
Figure 4–46: Display Floppy Disk File
Select: 3
Enter file name to display: bootcfg
Attempting to list contents of file: "bootcfg" ...
#-----------------------------------------------------------------------
#
# This is the Freeway server boot file for PCI bus ICP2432's. It #
# contains tables and examples of various Freeway and Host #
# configurations. This file is listed in the Freeway's boot parameters #
# under the name #
# "System Boot File Name" #
# #
# There must be a physical device entry for each ICP installed in the #
# Freeway for each ICP to be downloaded #
# #
# Each physical device (ICP) entry currently supports a single service #
# (usually a protocol) and has the following items #
# #
# 1) Device Name (icp0, icp1, icp2, icp3, etc.) #
# 2) Device Card Type (ICP2432) #
# 3) Slave Address (see table below) #
# 4) Bus Number (see table below) #
# 5) Download Script File (see text below) #
# #
# Server wide parameters are at the bottom of the file (see below) #
#-----------------------------------------------------------------------
#
# #
# DOWNLOAD SCRIPT FILE: #
# -------------------- #
/mnt/bootcfg 25%