User guide

110 DC 900-1333Q
Freeway User Guide
4.6.2 Modify User Names
To modify the Freeway user names, enter ‘3’ at the Modify Configuration menu. The
Modify User Names menu is shown in Figure 4–28. You must be logged in as a “root”
level user in order to modify user names. If you are not logged in as a “root” level user,
then you are only allowed to change the password on your login account.
To modify user names, you can select ‘2’ to add a user name or ‘3’ to delete one. In either
case, you are prompted to enter the user name, then asked to enter the password twice.
There can be up to 10 user names. User names can be up to 128 characters in length and
can include spaces. Passwords must be at least 8 characters in length and no more than
128 characters.
When you first install Freeway, the default user name (
freeway) and password
(
password) are in effect. Changes made with the Modify User Names menu modify the
permanent User/Password table. This table is checked each time Freeway is rebooted. If
all user names are removed or the table becomes corrupted, the User/Password table
will automatically be rebuilt the next time Freeway is rebooted and the default user
name and password will again be in effect.
Figure 4–28: Modify User Names
Modify User Names
-----------------
1) Return to Modify Configuration Menu
2) Add User to Login Table
3) Delete User From Login Table
Select: