User guide

4: Freeway Interactive Menu
DC 900-1333Q 105
4.6.1 Modify Boot Parameters
To modify the Freeway boot parameter settings, enter ‘2’ at the Modify Configuration
menu. Figure 4–27 shows typical boot parameter settings for a Freeway 2000. Any
changes made to these parameters are stored in Freeway’s non-volatile memory.
Ta bl e 4 –2 describes each parameter. Three actions are possible as each parameter is dis-
played:
• To preserve a parameter, press <return>
• To edit a parameter, type in the new alpha-numeric information followed by
<return>
• To null out a parameter, press the period key (‘.’) followed by <return>
After scrolling through all the parameters, type ‘
yes’ to save the changes or ‘no’ to cancel.
The System Boot Parameters are then redisplayed as modified.