Installation guide

38 DC 900-1325I
Freeway Server-Resident Application (SRA) Programmer Guide
cd /usr/local/freeway/client/bsd/bin
ls -l mysra*
-rwxr-xr-x 1 root guest 237519 Mar 14 23:56 mysra
-rw-r--r-- 1 root guest 73440 Mar 14 23:56 mysradcfg.bin
-rw-r--r-- 1 root guest 1608 Mar 14 23:56 mysratcfg.bin
mount -u -o rw /usr
cp -p mysra* /usr/local/freeway/boot.src
mount -u -o ro /usr
Step 2: Reboot the Freeway server. After the Freeway server boots, log back in to the
Freeway menu and run the FreeBSD shell:
reboot
[log back in to FreeBSD shell]
Step 3: Verify the operation of the SRA in the /tmp/boot directory:
cd /tmp/boot
ls -l mysra*
-rwxr-xr-x 1 root guest 237519 Mar 14 23:56 mysra
-rw-r--r-- 1 root guest 73440 Mar 14 23:56 mysradcfg.bin
-rw-r--r-- 1 root guest 1608 Mar 14 23:56 mysratcfg.bin
./mysra
Need help (Y/N) [N]? n
Minutes to run (1-14400) [1]? 1
Number of initial writes (0-16) [1]? 1
ICP board on which to run test (0-15) [0]? 0
Even port number (0, 2, ..., 14) [0]? 0
AWS Asynchronous Port-To-Port Loopback Program.
Test duration in minutes: 1 minute
Number of initial writes on each port: 1
ICP board number: 0
Ports: 0 & 1
OPEN SESSION server0icp0port0
OPEN SESSION server0icp0port1
>>><<><<>>><<><<>>><<><<>>><<><<>>><<><<>>><<><<>>><<><<>>><<>
[several lines omitted]
>>><<><<>>><<><<>>><<><<>>><<><<>>><<><<>>><<><<>>><<><<>>><<>
AWS Statistics Report:
server0icp0port0 server0icp0port1
----------------- -----------------
DCD UP 0 0
CTS UP 0 0
Breaks Received 0 0