User manual

CONFIDENTIAL Protium Technologies, Inc. 4050-9901
Rev No: 05
5 GHz RF Modem 31-Jan-2007 53 of 84
This document and information contained herein is subject to the restrictions set forth on the title page .
modemTemp the modem temperature exceeds the alarm threshold
rfTemp the RF module temperature exceeds the alarm threshold
paTemp the PA module temperature exceeds the alarm threshold
linkdown there is no frame lock on the receiver
txSynthOOL the TX frequency synthesizer is out of lock
txMuted the transmitter is muted
txNoPower no power is detected at the transmitter
txLowPower the transmitter power out is abnormally low
rxSynthOOL the RX frequency synthesizer is out of lock
rxAgcOOL the receiver automatic gain control has excessive error
rxLowRsl the receiver signal level is below the alarm threshold"
::= { alarmStatus 1 }
--
-- radio objects
--
radioMuteSetting OBJECT-TYPE
SYNTAX INTEGER { mute(0), unmute(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Desired unmute setting."
::= { radioConfig 1 }
radioDashVariation OBJECT-TYPE
SYNTAX INTEGER { undefined(0), txlow(1), txhigh(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of 1 indicates radio transmits in the low subband and
receives in the high subband. A value of 2 indicates the radio
transmits in the high subband and receives in the low subband.
A value of zero indicates the radio has not been configured. An
unconfigured radio will not transmit at all."
::= { radioConfig 2 }
radioTxFrequencySetting OBJECT-TYPE
SYNTAX Integer32
UNITS "KHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit frequency in KHz."
::= { radioConfig 3 }
radioRxFrequencySetting OBJECT-TYPE
SYNTAX Integer32
UNITS "KHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Receiver frequency in KHz."
::= { radioConfig 4 }
radioTxPowerSetting OBJECT-TYPE
SYNTAX Integer32
UNITS "cBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit output power in cBm (centibels referred to 1 mW)."