User manual

CONFIDENTIAL Protium Technologies, Inc. 4050-9901
Rev No: 05
5 GHz RF Modem 31-Jan-2007 40 of 84
This document and information contained herein is subject to the restrictions set forth on the title page .
6 Specifications
System
Frequency Range 5091 - 5150 MHz
T/R Spacing 54 or 49 MHz
Capacity 64/128 kb/s
Occupied Bandwidth 100/200 kHz
Modulation Type Modified Duobinary CPM
Forward Error Correction Reed-Solomon
Interleaving Selectable 0 - 6
Link Acquisition Time Less than 5 seconds
Power Supply Model 4050: 20 to 60 VDC, either polarity
Model 4050R: 100-132 VAC, 60 Hz
Power Consumption <30 Watts
System Gain @10
-6
BER 128/126 dB
Operating Modes Full/half Duplex
Transmitter
Transmitter Source Fully Synthesized
Frequency Tolerance < 1.5 ppm
Tuning Steps 0.1 MHz
Output Power 30 dBm
Power Adjustment Range >20 dB, 0.5 dB Steps
Spectral Compliance NTIA Spectrum Manual, Ch. 5
Tx Mute <-50 dBm
Receiver
Receiver Source Fully Synthesized
Frequency Tolerance < 1.5 ppm
Tuning Steps 0.1 MHz
Rx Threshold @ 10
-6
BER -98/-96 dBm
Dynamic Range > 70 dB
Maximum Input (without damage) +10 dBm
Residual BER <1x10
-10
Interfaces
Data EIA-530, EIA-232 (DB-25F, DCE) or IEEE 802.3 (RJ-45)
SNMP IEEE 802.3 (RJ-45)
Local Craft Interface Terminal (CIT) EIA-232, 9600 bps (DE-9F, DCE)
Alarms 8 pin mini-DIN, 4 form A contact pairs
Antenna Type N
Unit Management and Diagnostics
Local CIT Command line interface
SNMP Version 3
Physical Characteristics
Unit Size Model 4050: 1.8"H x 9.5"W x 12"D
Model 4050R: 1.73”H x 17”W x 13.33”D
Weight 5.0 lb.