User manual

CONFIDENTIAL Protium Technologies, Inc. 4050-9901
Rev No: 05
5 GHz RF Modem 31-Jan-2007 35 of 84
This document and information contained herein is subject to the restrictions set forth on the title page .
With a numeric argument, set the frequency to “ffff.f” MHz. The frequency may
be specified in 0.1 MHz (100 KHz) steps. The minimum and maximum
frequency depends on the dash variation of the modem:
DASH MINIMUM MAXIMUM
-1 5091.0 MHz 5101.0 MHz
-2 5140.0 MHz 5150.0 MHz
4.2.49 txpower Transmit Power Level
Usage: txpower [nn.n]
Authorization: Operator RO; Administrator RW
Display or set the current transmit power setting.
With no argument, displays the current transmit power setting. With a numeric
argument, sets the transmit power level to nn.n. The power level is specified in
dBm. Although tenths of a dBm may be specified on the command line, the
power level will be set to the next lower 0.5 dBm setting. The power level may
be set from a minimum of 0 dBm to a maximum of 30.0 dBm.
4.2.50 uptime System Uptime
Usage: uptime
Authorization: Operator RO; Administrator RO
Display the system “uptime” – the time since the modem was first started. Also
displays the modem’s current time (“wall” time) which will only be meaningful
if it has been successfully set using a timeserver. See the timeserver command
description.
Processor loading information is also shown but it is generally uninteresting.
4.2.51 version Version
Usage: version
Authorization: Operator RO; Administrator RO
Display the version of the software modules in the modem.