User Manual
LBL-xxxx Page 10
Proteus Two-part Patch Technical description Effective: xxXXX2016
10 Not applicable 3.7 7.4
100 Not applicable 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
8. European R&TTE Declaration of Conformity
Hereby, Proteus® Digital Health, Inc., declares that the Proteus two-part Patch is in compliance with
the essential requirements and other relevant provisions of R&TTE (Radio and Telecommunications
Terminal Equipment) Directive 1999/5/EC. The product is compliant with the following standards and/or
other normative documents:
Safety (art. 3.1a): EN 60601-1, 3
rd
Ed, IEC 60601-1-11
EMC (art. 3.1b): EN 301 489-17 v2.2.1
Spectrum (art.
3.2):
EN 300 328 v1.8.1
Other: EN 60601-1-2 (2014)
The Proteus two-part Patch can be used in all countries in the European Union.
9. FCC Declarations
9.1. FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or
modifications not expressly approved by Proteus Digital Health could void your authority to operate the
equipment.
9.2. FCC Wireless Notice
This product emits radio frequency energy, but the radiated output power of this device is far below the
FCC radio frequency exposure limits.
Note: