Owner's manual

NEVER LEAVE A FAN

UNATTENDED WHILE

OPERATING OR WHILE

CONNECTED TO A POWER

SOURCE

HVF Air Circulator User’s Manual

30” FLOOR FAN -OPTIONAL CEILING MOUNT

Ceiling Mount Installation

The installer MUST be certain that the

ceiling that the mounting bracket is

mounted to is able to support 100 pounds continuously.

MOUNTING BRACKET INSTALLATION:

1. Remove Wheel Frame (item 15 on page 8).

2. Attach Cart Frame to Ceiling beam using U-bolts (item

5 on page 10).

3. Assemble and attach Ceiling Mount Assembly as

shown in figure 10 on page 10.

SAFETY CABLE INSTALLATION:

1. After the fan is securely mounted, feed the safety cable

between one of the swivel brackets as shown in figure

2. Pull safety cable through and secure cable with safety

cable U-bolt as shown in figure 9.

3. Take other end of cable and wrap around beam

4. Secure cable loop as shown in step 2. Be sure there is

approximately 2 inches of slack in the safety cable

once both ends are secured.

5. Repeat on other side of fan so there are two safety

cables.

Figure 8: Safety Cable Installation

Figure 9: Safety Cable

Installation- Close Up

WARNING

Figure 10: Exploded View of PT-30-DDF (ceiling mount kit)

Item# Description Part Number

1 Safety Cable Assy 95-060-0100

2 Nut for Ceiling Swivel Pin 95-060-0180

3 Nut 95-060-0125

4 Upper Ceiling Bracket 95-060-0110

5 U-Bolt 95-060-0120

Ceiling Kit Replacement Parts

Item# Description Part Number

6 Top Washer 95-060-0120

7 Lower Ceiling Bracket 95-060-0160

8 Tapping Screw 5-15mm 95-060-0195

9 Ceiling Swivel Pin 95-060-0170

Ceiling Kit Exploded View