Specifications

· 25
WARNING AND ERROR MESSAGES
Battery was connected incorrectly. Check that the polarity of
the charge leads is correct.
The battery is no longer connected to the charger. Check to
make sure the charge leads are plugged in securely, and
examine the charge leads for damage.
The charge leads have been short-circuited. Check the charge
leads for damage.
The input voltage has fallen outside of the acceptable range
(12-18V DC)
The specified voltage of the battery pack does not match the
battery connected to the charger. Check the charger settings.
The charger has malfunctioned. Please contact ProTek R/C.
The voltage of the battery connected to the charger is lower
than that of the active charge profile. Check the number of
cells in the battery pack.
The voltage of the battery connected to the charger is higher
than that of the active charge profile. Check the number of
cells in the battery pack.
The voltage of at least one cell in the battery pack is too low.
Check the voltage of each cell.
The voltage of at least one cell in the battery pack is too high.
Check the voltage of each cell.
The battery’s balance lead is not connected to the charger’s
balance port. Check the balance lead and plug for damage.
The internal temperature of Prodigy 620 Duo is too high. Allow
the unit to cool before resuming operation.
The processor has malfunctioned. Please contact ProTek R/C.
The Prodigy 620 DUO constantly monitors its performance to ensure safe operation.
Should an error be detected, an alarm will sound and an error message will be
displayed.