Specifications

· 11
CONNECTING THE CHARGER
Connecting the Charger
The Prodigy 620 DUO comes with male 4mm Bullet connectors attached to the power
INPUT cables. These cables are appropriate for attaching directly to most high-quality
AC-DC power supply units, such as the ProTek R/C "Super Pro 1000" (30V/40A/1000W).
Also included are large Terminal Clips with matching 4mm female bullet connectors for
attaching directly to 12V car batteries. It is critically important that you use either a fully
charged 13.8V car battery or a high quality AC-DC power supply in the range of 15V to
18V DC output, with minimum current rating of 60A to insure reliable performance.
4mm Bullet
Connectors
plugging to
Super Pro 1000
power supply
directly
Using terminal
clip attaching to
car battery
To take advantage of the Prodigy 620 Duo's full power
capability, the power source should be 15V-18V DC,
and output power should be capable of 1000W or
higher. A low quality DC power source may damage
your Prodigy 620 DUO charger. We recommend our
PTK-PRO-1000W-SP - ProTek R/C "Super Pro 1000"
DC power supply. (Part # PTK-PRO-1000W-SP)