ProTek_P-8 Hauler Bag Manual V2

STEP 2 Assembly of Tool Caddy
2A) Place tool caddy on flat surface and pre-bend all hinged surfaces.
Note: Velcro gap on left side panel should be larger on top than on the bottom.
2B) Fold both sides up towards the center.
2C) Fold end up and over flaps from the sides. Push tab into the slot on bottom
of the tool caddy. Repeat for opposite side.
2D) Completed tool caddy.
2E) Secure velcro for pre-installed tool holder and place tool caddy in top of
hauler bag.