PTK-8519 625 DUO Touch AC Battery Charger Manual

WARNING AND SAFETY NOTES

These warnings and safety notes are particularly

important. Please follow the instructions for

maximum safety; otherwise the charger and the

battery can be damaged or at worst it can cause

a ﬁre or injury to the user.

Never leave the charger unattended when it is connected to its power

supply. If any malfunction is found, TERMINATE THE PROCESS AT ONCE

and refer to the operating manual. Always use a LiPo Safe bag or a non

Keep the charger well away from dust, damp, rain, heat, direct

sunlight and vibration. Never drop it.

The allowable DC input voltage is 11~18V DC. The allowable AC input

voltage is 110V or 220V AC.

This charger and the battery should be put on a heat-resistant,

nonﬂammable and nonconductive surface. Never place them on any

combustible surface. Keep all ﬂammable volatile materials away from

the operating area.

Make sure you know the speciﬁcations of the battery to be charged or

discharged to ensure it meets the requirements of this charger. If the

program is set up incorrectly, the battery and charger may be damaged.

It can cause ﬁre or explosion due to overcharging.

To avoid short-circuiting between the charge lead, always connect the

charge cable to the charger ﬁrst, then connect the battery. Reverse the

sequence when disconnecting.

ﬂammable non conductive containment box while in use.