PTK-8519 625 DUO Touch AC Battery Charger Manual

01
INTRODUCTION
These operating instructions are designed to ensure that you quickly
become familiar with the charger and its functions. It is therefore important
that you read through the Operating instructions, Warning and Safety Notes
before you attempt to use your new charger for the first time.
The ProTek Prodigy 625 integrates battery technology together with touch
operated system. Each channel is equipped with a 128x64 pixel resistive
touch screen, which plays a very important role in the entire system. Every
operating procedure and status change can be shown on this screen, making
the operating procedures very intuitive. When the battery is working, you can
directly check the battery capacity, battery voltage, charge time and internal
resistance on the screen. Additionally, the entire charging procedures can be
recorded and generated into a charging curve for you to check on the screen.
The 625 comes with a memory module. Users can edit and save parameters
of different batteries. Once the battery parameters are edited, the shortcut for
parameters will be generated on the screen, which provides a simple one-click
interface for users.
The 625 can be powered up with 12V car battery or 11-18V output power
supply, suitable for use with LiPo / LiFe / LiHV / Li-lon / NiMH / NiCd / Pb
batteries. Each channel delivers a maximum 25A charge current and maximum
200W charge power. The 625 has an Integrated high-performance micro
processor and high efficient cooling system.
Please BE SURE to read these INSTRUCTIONS, WARNING and SAFETY
NOTES before you use the charger for the first time.
It can be dangerous to mishandle batteries and battery chargers, as
there is always a risk of batteries catching fire and exploding. Please always
Please read this entire operating manual completely and attentively
before using this product, as it covers a wide range of information on
operating and safety or please use this product in the company of a
specialist.
charge multi-celled lithium batteries in balance mode and never leave your
battery unattended while the battery is working with the charger.