Specifications

96 Module 124: Protege GX Hardware Overview | Review Questions
In a new installation, how many spurs can come off a Controller on the RS-485 module
network?
 3
 4
 250
 None - star or spur wiring is not an acceptable method for new installations
Can multiple power supplies be connected to the Protege Module Network?
 No, the Module Network must only be powered at one location
 Yes, as long as the N+ connection is removed between the split sections
 Yes, as long as they are all in the same cabinet
 Yes, as long as they are all in different cabinets
If a door needs to operate in card and PIN mode, which reader should be used?
 The Nano Prox reader
 The Multi Prox reader
 The Vario reader
 The Vario PIN reader
If an ICT reader is connected to an ICT reader expander, is tamper monitoring possible?
 Yes, ICT readers and expanders can be programmed for intelligent tamper recognition.
 Yes, ICT readers include a tamper switch.
 Yes, ICT reader expanders include a tamper input.
 No, there is no tamper monitoring on ICT readers.
What is the maximum cable run for an ICT reader connected to an RDM2-DIN Reader
Expander?
 75m
 100m
 125m
 150m