Specifications

66 Module 124: Protege GX Hardware Overview | The Protege PCB Range
Electronic Lock Outputs (RDS2, RDI2, RDE2)
High current electronic monitored electric lock control Outputs:
 Indication of lock output activation using LED
 Lock failure monitoring or lock disconnected (tamper) displayed as indicator and reported using trouble
zone
 Automatic shutdown on lock over current when activated or shorted with automatic restore on next
deactivation/activation cycle. Shutdown reported using trouble zone.
 Drive electric strikes directly from the lock outputs
Elevator Control (RDI2, RDE2)
The RDI2 and RDE2 allow the control of two independent elevator cars capable of servicing 128 openings
(floors):
 Utilize button feedback for floor selection monitoring and single badge, single floor control prevents user
tailgating with full floor selection audit.
 Deny access to a user based on the status of the area on a specific floor that they are attempting to access
(button feedback required).
 Floor can use the Late Open option forcing the floor to remain locked on a schedule until valid access to the
floor is granted.
 Interface to the Protege 16 PGM Output Expander using the slave RS-485 communication port for
intelligent elevator control (controls 16 floors per Protege 16 PGM Output Expander per elevator car).
 Optional high level RS-485 communication to elevator control system (requires protocol documentation to
be provided).