Specifications

52 Module 124: Protege GX Hardware Overview | The Protege DIN Rail Range
Protege DIN Rail Mini 2 Reader Expander (PRT-RDM2-DIN)
The Protege DIN Rail Mini 2 Reader Expander extends the number of card reader inputs on a system by 2 (4
when using Multiple Reader mode), the number of inputs by 6, and the number of outputs by 8, providing
flexible access control, area control and alarm monitoring.
Feature Highlights:
 Connect 2 readers using the independent reader
inputs or connect 4 readers using the 2 reader
operation to provide dual entry and exit door
connection
 6 zone inputs
 2 FORM C lock outputs
 6 open collector outputs (Reader Control outputs) with
predefined configurations for instant connection (red
LED, green LED and buzzer control)
 Support for intelligent reader tamper operation
Door Access Control
 Two standard wiegand reader interface ports onboard
 Reader multiplexing allows 4 readers to be connected, for reader in and out on two doors
 Support for intelligent reader tamper operation
8 Onboard Inputs
 Use for access control, detection devices such as PIRs, or a mixture of both
 Most common EOL combinations supported (no need to change resistors when upgrading)
8 Onboard Outputs
 Two high current (7A) relays for control of locks, lights, etc
 Six low current (50mA) outputs for LED / buzzer control
PRT-RDM2-DIN: Technical Specifications
Technical Specifications
Operating Current 80mA (Typical)
DC Input Voltage 12VDC (+/-10%)
Doors 2 doors, up to 4 readers in multiplex mode
Inputs 6 4 state, EOL configurable, 1 module tamper
Outputs 2 Form C relays (7A max), 6 Open Collector (50mA)
Comms RS-485 Isolated Module Network