Specifications

Level One: Protege GX Installer Study Guide | August 2013 457
Module 135: Integrating Intruder Detection
and Access Control
Which of the following is a good example of where a Qualify Output should be used to
validate a schedule?
 To change a Doors entry reading mode when an area is armed
 To keep a door locked on a holiday
 To turn on the keypad red LED when an area is armed
 To unlock a door when an area is disarmed
To enable automatic disarming of an area when access to a door is granted, which of the
following must be configured?
 Area Inside Door (Set in door programming) and Disarm Users Area On Valid Card (Set in reader
expander programming)
 Reader One Arming Mode (Set in reader expander programming) and Disarm Users Area On Valid Card
(Set in reader expander programming)
 Area Inside Door (Set in door programming) and Disarm Area For Door On Access (Set in reader
expander programming)
 Reader One Arming Mode (Set in reader expander programming) and Disarm Area For Door On Access
(Set in reader expander programming)
If the first door on a reader expander has in and out readers, which of the following
statements are correct?
 D0 of the entry reader must be wired into D0 of reader port 2
 D1 of the entry reader must be wired into D1 of reader port 2
 D0 of the exit reader must be wired into D0 of reader port 2
 D1 of the exit reader must be wired into D1 of reader port 2