Specifications

450 Review Questions and Answers | Module 131: Hardware Programming
If Controller encryption is accidentally disabled, what additional step must be carried out to
get the Controller back online?
 The Controller must be defaulted to clear the encryption key
 Controller encryption should be enabled again
 Controller encryption should be initialized again
 Nothing. If encryption is disabled at the Server, the Controller will continue to communicate
Answer the following...
On a site where encryption between the Controller and Server is normally enabled, a Controller is defaulted. The
Controller does not come back online.
What additional step must be carried out to get the Controller back online?
 Encryption must be disabled for the Site
 Encryption must be re-initialized on the Controller
 Encryption must be disabled for the Controller
 A force download is required to push the existing encryption key out to the Controller
What is the correct Event Server IP address?
Assuming the screenshot shown is from the Protege GX Server.
What should a Controller with the IP address 192.168.10.2 have set as its Event Server IP address?
 192.168.10.1
 192.168.10.100
 192.168.1.1
 192.168.1.100