Specifications

Level One: Protege GX Installer Study Guide | August 2013 411
Task 18: Creating a Report IP Service
1. Navigate to Programming | Services
2. Select your Controller then click Add to create a new service
3. Set the Service Type to Report IP
4. Set the Service Mode to Start with Controller
5. Select the General tab:
 Enter the Client Code (or account number). This is the code used to identify the system at the
monitoring station and will usually be issued by the monitoring company. For the purpose of this
exercise, we'll just use 1234.
 Enter the IP Address and IP Port Number of the monitoring station. As we don't have "real"
connection details, we'll use the IP address of 123.45.67.89 and port 9467 for this exercise.
 Set the Reporting Protocol to ArmorIP (TCP) Encrypted.
6. Select the Options tab and enable the reporting options for the signals to be sent by the service. For the
purpose of this exercise, select Alarms, Tampers and Restore to report the corresponding input state
changes.
7. Right click the service from the Record List and choose Start Service.