Specifications

Level One: Protege GX Installer Study Guide | August 2013 409
Task 15: Creating Users, Assigning Access Levels, and
Adding Cards
1. Navigate to Users | Users
2. Create a new user named Manny Jah with the PIN 1111
3. Select the Access Levels tab. Add the Managers access level and click OK
4. Create additional users, adding PINs and assigning access levels as follows:
User Role PIN Card Access Level
Manny Jah Manager 1111 Card 1 Managers
Stu Roman Storeman 2222 Card 2 Warehouse
Whare Hausmann Storeman 3333 Card 3 Warehouse
Sel Ettuyu Sales Rep 4444 Card 4 Sales
Ike Cansalla Sales Rep 5555 Card 5 Sales
5. Badge the first training tag at the MultiProx reader. You should see an event come through in the event
window similar to that shown here:
6. Right click the event and select Add Card Number to Existing User
7. Select the user you wish to add the card to (Manny Jah) then click OK.
8. Repeat to add the remaining cards to the other users.
Task 16: Adding the Power Supply Module and Trouble
Inputs
1. Navigate to Expanders | Analog Expanders
2. Add a new Analog Expander named MEL PSU1
3. Ensure the Physical Address is set at 1
4. Navigate to Programming | Trouble Inputs