Specifications

Level One: Protege GX Installer Study Guide | August 2013 405
Task 9: Configuring Doors
1. Navigate to Programming | Doors
2. Using our naming conventions, rename DR1 to Showroom Entry MEL
3. Set the Door Type to Showroom
4. Set the Area Inside Door to Showroom
5. Set the Unlock Schedule to Opening Hours
6. Select the Options tab and enable the following options:
 Door Lock Follows Inside Area
 Area Disarmed AND Schedule Valid Unlock Door
7. Rename DR2 to Showroom to Warehouse MEL
8. Set the Area Inside Door to Warehouse
Task 10: Setting up Auto Disarming
1. Navigate to Expanders | Reader Expanders and select RD1
2. Go to the Reader One tab and select (enable) the Disarm Area For Door On Access option
3. Repeat for the Reader Two tab.
4. Save the changes