Specifications

Level One: Protege GX Installer Study Guide | August 2013 389
15. Create Users, Assign Access Levels, and Add Cards
 Create the following users, adding PINs and assigning the relevant access levels based on their role:
User Role PIN Card
Manny Jah Manager 1111 Card 1
Stu Roman Storeman 2222 Card 2
Whare Hausmann Storeman 3333 Card 3
Sel Ettuyu Sales Rep 4444 Card 4
Ike Cansalla Sales Rep 5555 Card 5
 Add each of the training cards to the corresponding user
16. Add Power Supply Module and Trouble Inputs
 Add the Power Supply module.
 Add the relevant trouble inputs:
Input Number Description
AExxx:01 Module Tamper
AExxx:02 Mains Failure
AExxx:03 Low Battery / Battery Failure
AExxx:04 Output Voltage Low
AExxx:05 Output Over Current Failure
AExxx:06 Core Temperature Over Temp Failure
AExxx:08 Module Offline
 Add the new trouble inputs to the All Trouble Inputs status list.
 Wire the tamper input closed.
17. Add Trouble Inputs to the System Area
 Add the Trouble Inputs to the System area, setting the input type to silent
18. Create a Report IP Service
 Add a Report IP Service. For the purpose of this exercise, use the following details:
 Client Code: 1234
 IP Address: 123.45.67.89
 IP Port: 9467
 Reporting Protocol: ArmorIP (TCP) Encrypted