Specifications

Level One: Protege GX Installer Study Guide | August 2013 385
Door Type Internal Area Schedule
Showroom Entry Door Card/PIN entry, REX exit Showroom Opening Hours
Showroom to Warehouse Card entry, REX exit Warehouse None
 The Showroom area will have the Showroom PIR, the Showroom Entry Door Reed, and the Showroom to
Warehouse Door Reed assigned to it
 The Warehouse area will have one PIR in each corner, the Showroom to Warehouse Door Reed, and the
Warehouse Roller Door Reed assigned to it
 We will also install a keypad in the Showroom that will be used to arm and disarm both areas
We will have 5 users as follows:
User Role PIN Card
Manny Jah Manager 1111 Card 1
Stu Roman Storeman 2222 Card 2
Whare Hausmann Storeman 3333 Card 3
Sel Ettuyu Sales Rep 4444 Card 4
Ike Cansalla Sales Rep 5555 Card 5
 Our manager requires 24/7 access to all areas.
 Our warehouse staff should have access to both the Warehouse and the Showroom, but only during
opening hours.
 Our sales reps require access to both the Warehouse and the Showroom during opening hours. In addition,
they should only be able to gain access to the Warehouse once the area has been disarmed by warehouse
staff.
Tasks
The following tasks outline the basic steps for setting things up according to the scenario requirements. Detailed
Step by Step instructions for each task are provided at the end of this module (see page 393) should you need
them.
1. Restore a Blank Database and Default the Controller
Before you begin, you will need to restore a blank database so you can start with a new site and with nothing
programmed. If you have not done this already in the previous module, do this now using the backup (.bak) file
supplied on your USB training card.
You will also need to default your Controller.
2. Add a Controller
 Using the Add Controller Wizard, add a new Controller with:
 8 Inputs
 1 Keypad
 1 Reader Expander (we only need one as we are only access controlling two doors)