Specifications

370 Module 137: System Commissioning | Keypad Testing
Door View Menu
Press [4] [1] [4]. This takes you to the Door View menu allowing you to view the current state of a door.
SelectDoorto
view:DR000000
 As with the previous menus, you'll be prompted to enter a door number.
 Navigation is carried out in the same manner.
Doors can also be controlled from this menu.
 Pressing the [1] key will send an unlock by menu command to the door. This will unlock the door for the
same period as a card badge or REX input would (5 seconds by default).
OfficeEntryTXS
(Closed)(Menu)
 After the time expires, the door locks again.
OfficeEntryTXS
(Closed)(Locked)
You'll notice that the [3] key has the word LAT next to it. This is short for LATCH.
 Pressing the [3] key will latch unlock the door.
OfficeEntryTXS
(Closed)(Latch)
 The door will now stay unlocked until another lock command is issued, such as when a schedule changes.
 Press the [2] key (OFF) to lock the door again.
OfficeEntryTXS
(Closed)(Locked)
Bypassing Inputs
Press
BYPASS
to access the Bypass Input menu.
 Navigate and select inputs in the same manner as other menus. The display will show the current bypass
state of the input.
OfficeEntryDr
isnotBYPASSED
 If an input is not bypassed, it will function as normal if the area is armed. To bypass an input, press the [1]
key (ON).
OfficeEntryDr
isBYPASSED
The next time an area arms, this input will be ignored and will be able to open and close without activating
an alarm.
Note: When the area is next disarmed, the bypass will clear automatically.